| Customization: | Available |
|---|---|
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Journal Surface Roughness: | 0.63-0.16μm |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description:
Single splined shaft for IHI motor,
Splined shaft for H-HVK/HVL/HVN series Marine vane motor
Could replace Japanese IHI vane motor spare parts with three series of
HVK, HVN, HVL total 10 size which can used in ship crane and port crane, deck crane but also other machineries (I. E. Windlass, mooring winch, etc)
HVK HVN HVL series vane motor parts:
We manufacturer Japanese IHI vane motor parts, include hexagon bolt, seal cover, J type seal, flet packing sheet, seal ring, front distance ring, TCN oil seal , O-ring, front flange, Bearing, casing (housing), bush, check valve, side oil seal ,shaft , bolt , nut , plate , spring , pin , push rod, rocker beam , small collar, parallel pin , rotor, vane , stator , big collar, rear distance ring, housing washer, rear flange etc....
HVK HVL HVN Series vane motor technical data:
| Motor type | HVK-A | HVK-A | HVL-A | HVL-A | HVL-A | HVL-S | HVN-S | HVN-S | HVK-S | HVN-D |
| Motor Code | F2-7318 | F2-7317 | F2-8134 | F2-8135 | F2-8091 | F2-8093 | F2-8094 | F2-8095 | F2-8136 | F2-8223 |
| Rated Rotation r/min |
41.7 | 41.7 | 35 | 35 | 41.3 | 27.4 | 86.7 | 89.1 | 43.0 | 88.4 |
| supply Oil L/min |
305.0 | 305.0 | 387 | 387 | 456.0 | 309.0 | 309.0 | 312.0 | 310.0 | 311.0 |
| Reference oil L/min |
309 | 309 | 392 | 392 | 507 | \ | \ | \ | \ | \ |
| Efficiency pressure MPa |
12.7 | 12.7 | 11.9 | 11.9 | 13.4 | 12.5 | 13.4 | 10.3 | 10.4 | 11.3 |
| Relief valve Adjust pressure MPa |
16.0 | 16.0 | 15 | 15 | 16.7 | 16.0 | 16.7 | 13.0 | 13.0 | 14.0 |
| Low speed roll up rotation r/min |
41.7 | 41.7 | 35 | 35 | 41.3 | 27.4 | 86.7 | 89.1 | 43.0 | 88.4 |
| Middle speed roll up rotation r/min |
62.6 | 62.6 | 52.5 | 52.5 | 62.0 | \ | \ | \ | \ | \ |
| High speed roll up rotation r/min |
125 | 125 | 105 | 105 | 124 | \ | \ | \ | \ | 178.6 |
| Roll down limit rotation speed r/min |
≤ 132 | ≤ 132 | ≤ 111 | ≤ 111 | ≤ 131 | ≤ 30 | ≤ 100 | ≤ 100 | ≤ 50 | ≤ 175 |
| Rated load Static skid T(S) |
≥ 20 | ≥ 20 | ≥ 20 | ≥ 20 | ≥ 20 | ≥ 20 | ≥ 15 | ≥ 15 | ≥ 20 | ≥ 15 |
| Rated load Hoisting load T(TON) |
4.35 | 4.35 | 6.5 | 6.5 | 6.5 | 6.5 | 2.10 | 2.1 | 4.35 | 2.1 |
| Displacement L/r |
6.741 | 6.741 | 10.149 | 10.149 | 10.149 | 10.149 | 3.304 | 3.304 | 3.304 | 3.304 |
| Rated Pressure MPa |
14.7 | 14.7 | 14.7 | 14.7 | 14.7 | 14.7 | 14.7 | 14.7 | 14.7 | 14.7 |
| Actual Torque at Rated pressure N*M |
14700 | 14700 | 22050 | 22050 | 22050 | 22050 | 7350 | 7350 | 7350 | 7350 |
| Min. Speed r/min |
4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Mechanical efficiency % |
96 | 96 | 96 | 96 | 96 | 96 | 96 | 96 | 96 | 96 |
){kind=link}